Network Configuration NT4

Installing TCP/IP - Windows NT4
If TCP/IP is not already installed on the system, NT will need to copy files from the NT CD-ROM to install the protocol. Note: You must have the Windows NT Installation media and any NT service packs available before proceeding.

  1. At the Network menu in Control Panel, select the Protocols tab and click Add.

CProxy Server: NT List of Installed Protocols

  1. Select TCP/IP from the list of network protocols and click Add. Necessary files will be copied from the NT CD-ROM to the hard drive and TCP/IP will appear in the list on installed network protocols. Click OK to complete the installation.
  2. The workstation should be restarted to allow TCP/IP to initialize.

Return to Networking Menu
Return to Main Index