Network Configuration (NT4)

CProxy Server is an Internet based application, and uses the TCP/IP protocol to send and receive data from the Internet and client workstations on your network. Before you can access the Internet, your computer must be able to communicate with the server using this protocol. You should be logged in as Administrator before proceeding.

To check if TCP/IP is installed on your computer:

  1. Click Start
  2. Select Settings
  3. Select Control Panel
  4. Double click on Network with the left mouse button

  1. Click on the Protocols tab
  2. TCP/IP should be present in the list of Network Protocols. If this is not the case, see Installing TCP/IP.

Return to Networking Index
Return to Main Index