Q: How do I configure Real Player G2 to use CProxy Server?

A: CProxy Server Configuration:

1. Open and unlock the CProxy Server.
2. Select Options > Protocol Options > Real Player Options.
3. Set the port value to 1090.
4. Press OK.
5. Click File > Save Settings to complete CProxy configuration.

Real Player G2 Configuration:

1. Open Real Player.
2. Select Options > Preferences.
3. Click on the Proxy tab.
4. Check Use PNA Proxy.
5. Enter the IP address of your CProxy Server into the field directly to the right of Use PNA Proxy.
6. Enter 1090 in the port field on the same line.
7. Check the radio box labeled Use my web browsers HTTP proxy under the HTTP Options section.
8. Click OK.
9. Restart Real Player to ensure the settings take effect.

Notes:
CProxy Server 3.3 SP1 provides support for PNA proxying. RTSP is not supported at this time.

Return to Index