| EMail Client Configuration Email clients are used to send and receive email from the Internet. Before
configuring an email program for use with CProxy Server, you will need to enable the POP3
and SMTP services within CProxy from the Options > Protocol Options > POP3 Options
& SMTP Options respectively.
Qualcomm Eudora Light (3.0.6)
- Launch Eudora.
- Select Options from the Tools menu.
- Select Personal Info from the Category
menu.
- Enter the username@x.x.x.x in the POP Account
field where username is your POP3 username and x.x.x.x is the IP address of the CProxy
Server.
- Enter your name in the Real Name field and
enter your email address in the Return Address field.
CProxy Server: Eudora
Light Configuration
- Click Hosts in the Category
menu and enter the IP address of CProxy Server in the SMTP field.
- Click OK to close the Options menu and
complete configuration.
Microsoft Outlook Express
- Load Outlook Express as normal.
- Click Tools and then Accounts
to display your currently defined Internet accounts.
- Click Add followed by Mail
to load the mail connection wizard.
- Enter your name in the Display name field
and press next.
- Enter your email address in the E-mail address field
and press next.
- The incoming mail server is a POP3 server.
CProxy Server: Outlook
Express Configuration
- Enter the IP address of the workstation running CProxy
Server in the Incoming mail server field - e.g. 192.168.0.1.
- Enter the IP address of the workstation running CProxy
Server in the Outgoing mail server field - e.g. 192.168.0.1 and press next.
- Enter your POP3 username and password in the Username
and Password fields. Click next.
- Click next on the Friendly Name
menu.
- Select LAN connection on the Choose Connection Type menu
and press next.
CProxy Server: Outlook
Express Configuration
- Click Finish to complete the setup.
Microsoft Internet Mail
- Load Internet Mail as normal.
- Click on the Mail menu and select Options.
- From the Options menu, select the Servers tab.
CProxy Server: Internet
Mail Configuration
- Enter the IP address of the workstation running CProxy
Server in both the SMTP and POP3 server name fields.
- Enter your POP3 username and password in the POP3 account
fields.
- Click the Connection tab and ensure that
you are connecting through a LAN.
- Press Apply and OK to
complete the setup.
Configuring Microsoft Inbox (Version 4.0)
- Load Inbox as Normal.
- Click on the Tools menu followed by Services.
- If Internet Mail is present in the list of
installed services, highlight Internet Mail and click Properties. If
Internet Mail is not present, click Add, select Internet Mail from the
list of services and press OK to add the Service.
CProxy Server: Inbox
Configuration
- On the Internet Mail properties menu, enter your name and
email address in the relevant fields.
- Enter the IP address of the CProxy Server in the Internet
Mail Server field.
- Enter your POP3 username and password in the correct fields.
- Click the Connection tab and ensure that
you are connection through a LAN.
- Press Apply and OK to
complete the setup.
Configuring Pegasus Mail
- Load Pegasus Mail in the normal way.
- Click on Tools on the menu bar and select Options
from the menu.
- Select the Network tab from the Options
menu.
CProxy Server: Pegasus
Configuration
- Enter your email address in the relevant field.
- Enter the IP address of the CProxy Server in the POP3
Host field - e.g.192.168.0.1
- Enter your POP3 username and password in the relevant
fields.
- Enter the IP address of the CProxy Server in the SMTP
Host field - e.g. 192.168.0.1
- Press OK to complete the configuration.
Configuring Microsoft Outlook 97
- Load Outlook as Normal.
- Click on the Tools menu followed by Services.
- If Internet Mail is present in the list of
installed services, highlight Internet Mail and click Properties. If
Internet Mail is not present, click Add, select Internet Mail from the
list of services and press OK to add the Service.
CProxy Server: Outlook
97 Configuration
- On the Internet Mail properties menu, enter your name and
email address in the relevant fields.
- Enter the IP address of the CProxy Server in the Internet
Mail Server field.
- Enter your POP3 username and password in the correct fields.
- Click the Connection tab and ensure that
you are connection through a LAN.
- Press Apply and OK to
complete the setup.
Return to Index |